- Specifically designed to enhance a machines grading, trenching, or clamshell capabilites with precise control. Capable of 120 degrees of jaw movement.
- High strength steel is used throughout the weldment. Hardened greasable bushings are utilized at all pivot points. High quality actuator used inside cross tube with no exposed cylinders. Each bucket is engineered with tapered side plates to reduce wear on the buckets sides, and to allow for easier dumping. Includes a holding force of approximately 3x clamping force, while maintaining constant operating speed.
- Standard Sizes Available: Widths range from 24″ and 60″ pending machine class. Capacities range from 0.46 cu yd up to 1.50 cu yd.
- Eliminates the need for any additional attachment and can be utilized along with a mechanical or hydraulic coupler, also available.
Similar Products
Ditching Cleaning & Grading Bucket
Teeth are not used on these buckets due to the application.
Sizes Ava...
Recessed Pin Coupler Bucket
The reduced tip radius enables the bucket to cut through the ground m...
Severe Duty Excavator Bucket
T-1 steel is utilized in all critical or high wear components. This ...
Trapezoidal V Ditch Bucket
T-1 steel is utilized in all critical and high wear components. Wear...
Severe Duty Ditching and Grading Bucket
T-1 steel is utilized in all high wear components. A rigid top sectio...
Skeleton Rock Bucket
Specifically designed to handle loose rock, separating large rock and...