Call us
Severe Duty Ditching and Grading Bucket

Severe Duty Ditching and Grading Bucket

Call for Price

Price

Make:
Werk-Brau
Model:
Severe Duty Ditching and Grading Bucket
Category:
Excavator, New, Werk-Brau
  • T-1 steel is utilized in all high wear components. A rigid top section assures structural stability in the wider sizes. This bucket features a double bottom, side wear guards, and a center rib.  Each bucket is engineered with tapered side plates to reduce wear on the buckets sides, and to allow for easier dumping.
  • Teeth are not used on these buckets due to the application.
  • Sizes Available: Standard widths range from 48″ – 84″, and capacities of .64 cu. yd. – 4.0 cu. yd.
  • The Severe duty features all the same features as the standard duty, but is built to handle greater stress.  This bucket features a double bottom, side wear guards, and a center rib.

Similar Products

Wheel Compactor

Wheel Compactor

High strength steel is used throughout the assembly. Replaceable heav...
Ditching Cleaning & Grading Bucket

Ditching Cleaning & Grading Bucket

Teeth are not used on these buckets due to the application. Sizes Ava...
Recessed Pin Coupler Bucket

Recessed Pin Coupler Bucket

The reduced tip radius enables the bucket to cut through the ground m...
Severe Duty Excavator Bucket

Severe Duty Excavator Bucket

T-1 steel is utilized in all critical or high wear components. This ...
Trapezoidal V Ditch Bucket

Trapezoidal V Ditch Bucket

T-1 steel is utilized in all critical and high wear components. Wear...
Grading Rake

Grading Rake

Werk-Brau’s grading rake is built using 2 skins for added stren...
Skeleton Rock Bucket

Skeleton Rock Bucket

Specifically designed to handle loose rock, separating large rock and...
Frost and Rock Ripper

Frost and Rock Ripper

Werk-Brau uses T-1 steel in all critical or high wear components to e...